Kwa LED zinazoonekana za rangi, kawaida, tunapima mwangaza na mcd. Lakini kwa taa zote za IR, kitengo hicho kitabadilika kuwa mw / sr. Ukali wa nuru uliopimwa kwa mW / cm² ni kigezo kinachofaa zaidi. Kwa sababu kina ambacho taa inahitaji kupenya inategemea ikiwa bidhaa inakabiliana na majeraha ya tishu za uso au matibabu ya kina ya misuli, ambayo pia itakuwa sababu muhimu katika uchaguzi wa LED kwa suala la urefu wa nishati, nguvu na nguvu. LED ya 880nm sio taa ya kawaida ya infrared kama 940nm LED au 850nm LED. Imegundulika kuwa LED za 880 nm zinaweza kusaidia majeraha ya misuli na misuli endelevu katika mafunzo. Kama unavyojua, shenzhen Best LED opto-electroinc co., Ltd ni mtengenezaji mwenye ujuzi wa LED, ambaye anaweza kupakia hii 880nm wazi ya kufa na kesi tofauti. kama vile: 3528 kesi ya LED ya SMD, kesi ya 5050 SMD ya LED, kesi ya 2835 SMD ya LED au kesi nyingine ya kupitia-shimo la LED, kesi ya 3mm kupitia-shimo la LED au 5mm kupitia-shimo kesi ya ect. Vinjari wavuti yetu, ikiwa huwezi kupata inayoweza kukidhi mahitaji yako. Jisikie huru kuwasiliana nasi kwa undani zaidi.

- Vigezo vya Vipimo -

Kesi hizi za SMD LED zinapatikana pia kwa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Kutoa Rangi -

- Vigezo vya Umeme -

Viwango vya juu kabisa kwa Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	120mW
Pulse Forward Current	IFP	350mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	2000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Tabia za macho na umeme ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4		2.0	V	IF=50mA
Pulse Forward Voltage	VF		2.6		V	IFP=350mA
Radiant Intensity	IE	7		12	mw/sr	IF=50mA
Peak Wavelength	λP	870	880	890	nm	IF=50mA
Total Radiated Power	PO		3.0		mw	IF=50mA
Half Width	Dl		50		nm	IF=50mA
Viewing Half Angle	2q1/2		±60		deg	IF=50mA
Reverse Current	IR			5	uA	VR=5V
Rise Time	Tr		600		ns	IF=50mA
Fall Time	Tf		300		ns	IF=50mA
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- 880nm LED -

- Uunganisho wa waya wa Dhahabu -

* Ili kuweka kila urefu wa maisha ya LED, kiwanda cha BestLED hutumia waya safi wa dhahabu safi kwa unganisho la mzunguko wa ndani

- Ufungashaji -

* Tunakipakia na kufunga utupu baada ya mkanda kama reel

- Maombi -

- LED inayohusiana ya IR SMD -

- Uzalishaji -

- Matumizi -