Kama tunavyoweza kuona picha kama ifuatavyo, kuna kesi ya LED ya 3528 ya SMD iliyo na risasi nne na kuna nafasi 3 ndani ya 3528 SMD LED. Ambayo inamaanisha tunaweza kuiweka na 3 wazi za kufa ndani yake. Kwa bidhaa hii, tunaweka 850nm na 400nm ndani. Aina hizi mbili za LED zinaweza kutoa rangi tofauti ya taa na itakuwa na aina mbili za matokeo ya taa. Kwa kuwa ni LED ya kawaida, unaweza kuiweka na chip tofauti ndani kama muundo wa mradi wako. Je! Unahitaji LED maalum kwa mradi wako? Chips 1 3528 SMD LED, 2 chips 3528 SMD LED au chips 3 3528 SMD LED, sote tunaweza kuizalisha kama mahitaji yako. Wasiliana nasi sasa ~

- Vigezo vya Vipimo -

Kesi hizi za SMD LED zinapatikana pia kwa IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Kutoa Rangi -

- Vigezo vya Umeme -

Parameter	Symbol	Rating		Unit
			Purple
Power Dissipation	Pd	50	100	mw
Pulse Forward Current	IFP	100	100	mA
Forward Current	IF	30	30	mA
Reverse Voltage	VR	5	5	V
Junction Temperature	Tj	110		°C
Operating Temperature	Topr	-40 ~ +80		°C
Storage Temperature Range	Tstg	-40 ~ +100		°C
Soldering Temperature	Tsol	260		°C
Electro-Static-Discharge(HBM)	ESD	2000	2000	V
Service life under normal conditions	Time	80000		H
Warranty	Time	5		Years
Antistatic	Piece	2000		Back

Tabia za macho na umeme ( T c = 25 ℃ )

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	IR	VF	1.8	2.0	2.4	V	IF=20mA
	UV		2.8	3.0
Luminous Intensity	IR	IV	1		5	mw/sr	IF=20mA
	UV		300		600	mcd
Peak Wavelength	IR	λP		850		nm	IF=20mA
	UV			400
Half Width		Dl		18		nm	IF=20mA
Viewing Half Angle		2q1/2		±60		deg	IF=20mA
Reverse Current		IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Uunganisho wa waya wa Dhahabu -

* Ili kuweka kila urefu wa maisha ya LED, kiwanda cha BestLED hutumia waya safi wa dhahabu safi kwa unganisho la mzunguko wa ndani

- Ufungashaji -

* Tunakipakia na kufunga utupu baada ya mkanda kama reel

- Uzalishaji -

- Matumizi -